您好，在本视频中，我们将学习如何启动我们的系统并使电机转动，一个电机将转动五秒钟，然后电机一将停止，电机二将运行其启动线一，但不正常。
Hello, in this video, we will learn how can we start our system and to motor will turn, one motor will turn for five second and then motor one will stop and the motor two is going to run its start line one and not OK.

就是这样。
And that is it.

这里的两间和三间四间转租给了这里。
This two here and three four subleased to here.

还有这个，这是四向电机和三个常开三重触点两次旋转90度和旋转90度。
And this, this is four to motor and three normal open triple contact two times rotate 90 and rotate and 90 degrees.

好的，这两个都可以，让我们将它们连接在一起。
OK, and this two is OK and let's connect them all together.

而且非常好。
And very good.

继续。
Continue.

我们现在将设计我们的系统，并在这里再设计三个折磨和三相感应电机。
We will design our system now and three more torture here and Triphase induction motor to here again.

呃，让我们同意听听。
Uh, let's agree to hear and to hear.

好的。
OK.

非常好。
Very good.

非常好。
Very good.

现在我们可以继续，停止按钮和启动按钮，启动我们的系统和停止我们的系统。
Now we can continue, stop button and start button, start our system and stop our system.

所以这就是我们聆听和倾听的力量。
So this is our power to hear and to hear.

所以我需要了解的是，我们的系统是否正常工作？
So what I need I need to understand, is our system working or not?

那么接触器线圈要听一下，好吗？
So a contactor Coile to hear, OK?

这将是我们的系统，好吗？
And this will be our system, OK?

我将用它来理解我们的系统。
And I will use it to understand our system.

所以我会说听到X，Y就OK并且没有一个常开触点，而不是三重。
So I will say to hear X, Y is OK and no one normally open contact, not triple.

当我启动我的系统时听到的最新消息，好吧，这个系统将是这是第一件事，然后我们可以继续。
The latest one to hear then when I start my system, OK, this system will be this is the first thing and then we can continue.

首先，监视将要发生的事情，让我们说听听。
First of all, monitor what is going to turn and let's say to hear one.

但在我们需要联系她两次之前，先联系她。
But before we need to contact her two times, contact her.

而且我也需要时间。
And also I need the time.

好的，我们已经了解了 DeLay 定时器，那么当我的系统激活时我会将它放在这里，好吗？
OK, we already learned on DeLay timer, then I will put it to here when my system is activated, OK?

这个计时器会起作用。
And this timer will work.

所以我需要把它放在其他地方。
So what I need I need to put it to here somewhere else.

OK，做成这样就可以通过了。
OK, make it like this may be adopted.

好的，在这里。
OK, here.

现在这个计时器计时器可以工作了，而且也需要工作正常。
Now this timer timer will work and also this needs to work ok.

该线圈必须工作。
This coil must work.

所以我需要什么。
So what I need.

但在听我们需要使用什么之前，我们需要使用这个Tionne定时器的常开或常闭触点以及我们如何使用它。
But before to hear what we need to use, we need to use normally open or close contact of this Tionne timer and how can we use it.

通常情况下，密切接触者会在这个时间之前到达这里。
Normally close contact is going to be come here before this timer.

让我们给定时器五。
Let's give a timer five.

好的，这个定时器五对五。
OK, this timer five to five.

好的，通常靠近这里，这里和这里有两个。
OK, normally close to here and two here and here.

例如，这将是 K 1，好的，这将是 Motorama K 1。
And this will be, for example, K one, OK, and this will be Motorama K one.

已选定。
It's selected.

非常好。
Very good.

现在，这是定时器打开时定时器的整洁、常开触点。
And now this is the neat, normal open contact of the timer when the timer is on.

好的，这里是八个。
OK, that is eight here.

在这里五年和八年，接触者二个月或两个月，让我们来找你。
Five and eight year here, contactor two for the month or two, and let's come to you.

效果非常好，现在很容易听到。
And it came to very good and now it's easy to hear.

这是我们的控制电路，非常好。
And this is our control circuit and very good.

这是我们的系统和开始按钮。
So this is our system and start button.

或者我们可以说只是开始，我们可以说到这里，停止，现在我们可以开始了。
Or we can say just the start, we can say to here, stop, and now we can start.

那么，如果我按下启动按钮，而该电机正在转动并且该电机正在转动，会发生什么？
So what will happen if I press to start button than this motor is turning and that this is turning?

那么问题出在哪里呢？
So where is the problem?

因为我们没有在计时器中输入任何时间，所以假设听到十秒钟并开始启动我的系统，并且第一个电机正在转动、运行和运行。
Because we didn't enter any time to my timer, let's say to hear ten seconds and start start my system and first motor is turning and running and running.

好的，五加四加三加二加一。
OK, five and four and three and two and one.

所以它正在停止并且正在转动。
So then it is stopping and it is turning.

你可以看到。
You can see it.

因此，如果我停止该系统以使电机停止，这总是会转动。
So this is always going to be turn if I stop this system to motor stop.

例如，如果我说五秒钟，第一个电机然后第二个电机将被激活，让我们尝试四和三和二和一。
If I say for example, five second, first motor and then second motor will be active, let's try and four and three and two and one.

常闭触点消失，现在常开触点被激活，因为该计时器为高电平。
Normally close contact is gone and now normal open contact is activated because of this timer is high.

因此，现在接触器二被激活，然后接触器二被激活，接触器二被激活，电机开始转动。
So contactor two is activated now and then this is activated and this is activated and the motor is turning.

好的，我已经完成了这个视频。
OK, so I'm finished for this video.

下一个视频见。
See you in the next video.